3D render of the Mini Drawer Cabinet: a graphite frame with three white drawers and orange handles, one drawer open
Free 3D model

Mini Drawer Cabinet

A desk organiser with two small drawers on top and a wide one below. Every drawer stops before it can fall out, the handles clip on in a second colour, and dovetail keys join cabinets on top of each other or side by side. No screws, no glue, and every part prints without supports.

  • 9printed parts
  • 15 × 15 × 11 cmassembled (L × W × H)
  • ≈ 0.6 kgfilament in total
  • 130 mmbuild height for the frame, which prints on its back
Download all files ZIP · 97 KB

Free for personal use under CC BY-NC 4.0: print it, remix it and share it with credit to Shapekit. Please don't sell the files or the prints.

Take it apart in 3D · Parts · How to build it

In 3D

Turn it, take it apart

Every part as you print it. Pick colours to see what your filament will look like.

The 3D model (0.4 MB) loads when you get here.

Preview colours

Frame and keys
Drawers
Handles

Drag to rotate · scroll or pinch to zoom

In the download

5 parts, ready to print

Every STL is already placed the right way up. Download them all at once, or one by one.

Frame

Two small openings over a wide one. A springy catch in the ceiling of each opening stops the drawer, and dovetail slots on all four sides take the link keys.

Size
150 × 130 × 112 mm
Print
On its back, front facing up. No supports.
Filament
≈ 337 g
STL 78 KB

Small drawer × 2

66 × 125 mm inside and 40 mm deep, with rounded inside corners so small parts slide out easily, two slots for the handle and a recess for a label.

Size
130 × 73 × 45 mm
Print
Standing on its bottom. No supports.
Filament
≈ 127 g
STL 76 KB

Big drawer

140 × 125 mm inside and 56 mm deep, with the same rounded corners, handle slots and label recess.

Size
147 × 130 × 61 mm
Print
Standing on its bottom. No supports.
Filament
≈ 129 g
STL 76 KB

Handle × 3

A D-pull that clips through two slots in a drawer front. Pinch its tips together inside the drawer to take it off again.

Size
49 × 27 × 10 mm
Print
Flat, as it lies. No supports. Print it in a contrasting colour.
Filament
≈ 14 g
STL 0.2 MB

Link key × 2

A double dovetail that slides into the slots of two cabinets from the back and holds them together. Two per join; print more for a bigger wall of drawers.

Size
30 × 9 × 3 mm
Print
Flat on one of its wide faces. No supports.
Filament
≈ 2 g
STL 11 KB
Also needed

Parts you buy

  • Nothing else: no screws, no glue, no other hardware.
  • Optional: a label or a strip of paper, 40 × 10 mm, for the recess in each drawer front.
  • Optional: four small self-adhesive rubber bumpers under the frame, so it doesn't slide on the desk.
Print settings

Slicer settings

0.20 mmlayer height
3walls
15%gyroid infill
PLA or PETGmaterial

For a 0.4 mm nozzle. Filament amounts are estimates for these settings.

Assembly

How to build it

Print the parts

Nothing needs supports. The frame prints on its back with the front facing up and is 130 mm tall. Print the handles in a second colour if you like.

Check the catches

In the ceiling of each opening, near the front, hangs a tongue with a small nub. Push it up with a finger: it should spring back. Clean off any strings around it.

Clip on the handles

Push the two tips of a handle through the slots in a drawer front until the barbs click behind it.

Slide in the drawers

Push each drawer in. Its back wall lifts the nub on the way in, and the drawer closes against the frame. Pulled out, it stops at 108 mm.

Join more cabinets

Line up two cabinets on top of each other or side by side and slide two link keys into the matching slots from the back until they stop.

Taking a drawer out

Pull the drawer to its stop, push the nub up with a fingertip from inside the drawer and pull the drawer past it.

More free models

Print this one next

3D render of the Radial Engine: seven silver finned cylinders around a graphite crankcase, a black three-blade propeller with a red spinner, on a white stand

Radial Engine

A 7-cylinder radial with a master rod, six link rods and a 34 cm propeller. Turn the crank and all seven pistons move.

  • 19 parts
  • ≈ 1.0 kg filament
  • STL
View and download
3D render of the V8 Engine: an orange block with graphite heads, eight silver velocity stacks, timing gears and the hand-turned pulley at the front, on a black stand

V8 Engine

A cross-plane V8 with a gear-driven camshaft and sixteen moving valves. Turn the handle and watch it run.

  • 26 parts
  • ≈ 0.8 kg filament
  • STL
View and download
3D render of the Tourbillon Wall Clock: a white dial with black hands over yellow gears in a graphite frame, the tourbillon cage with its blue balance and hairspring below

Tourbillon Wall Clock

A weight-driven wall clock with a one-minute tourbillon that is also its seconds hand.

  • 34 parts
  • ≈ 0.3 kg filament
  • STL
View and download
3D render of the Walking Strandbeest: eight orange Jansen legs on a graphite body with white cranks

Walking Strandbeest

Eight Theo Jansen legs and an N20 gear motor on two AA batteries. It walks across your desk by itself.

  • 17 parts
  • ≈ 0.2 kg filament
  • STL
View and download
3D render of the Turbo Desk Fan from the front

Turbo Desk Fan

A working desk fan shaped like a car turbocharger, with a speed knob in the base.

  • 4 parts
  • ≈ 0.9 kg filament
  • STL
View and download
3D render of the Jet Engine Desk Fan: a white engine with a dark fan on a black base

Jet Engine Desk Fan

A turbofan with 20 swept blades. Fits the Turbo Desk Fan's base and prints without supports.

  • 7 parts
  • ≈ 0.8 kg filament
  • STL
View and download
3D render of the Self-Watering Planter: a fluted terracotta pot with a dark inner pot and the fill cap at the back

Self-Watering Planter

A fluted planter for a 12 cm plant, with a hidden 0.6 litre reservoir and a float that shows the water level.

  • 6 parts
  • ≈ 0.6 kg filament
  • STL
View and download
3D render of the Headphone Stand: a white base and upright with a teal cushioned hanger

Headphone Stand

A sturdy headphone stand with a bayonet base, a cushioned hanger, an earbud tray and a cable hook.

  • 3 parts
  • ≈ 0.3 kg filament
  • STL
View and download
3D render of the stand: a white base with an orange back support, holding a phone

Phone & Tablet Stand

Plug the back in at 55, 65 or 75 degrees. Fits phones and tablets in a case, with a slot for the charging cable.

  • 2 parts
  • ≈ 0.1 kg filament
  • STL
View and download
3D render of the Bird Feeder: a sage green roof and tray with a white seed tube and a dark hanging loop

Bird Feeder

A hanging seed feeder with a twist-lock tube, a perch ring and a roof that slides up to refill.

  • 4 parts
  • ≈ 0.3 kg filament
  • STL
View and download
3D render of the Rotating Desk Organizer: a white carousel with pen cups, a scissor slot and a tray on a dark base

Rotating Desk Organizer

Pen cups, a scissor slot and a tray on a base that spins smoothly on 6 mm airsoft BBs.

  • 3 parts
  • ≈ 0.3 kg filament
  • STL
View and download
3D render of the Planetary Gear Desk Toy: a graphite housing on a foot with orange gears, a white carrier, pointer and crank

Planetary Gear Desk Toy

A hand-cranked 5:1 planetary gearbox with herringbone teeth. Clicks together and prints without supports.

  • 7 parts
  • ≈ 0.2 kg filament
  • STL
View and download
3D render of the Laptop Stand: two graphite side stands joined by orange cross bars, holding an open 14-inch laptop

Laptop Stand

Lifts your screen about 12 cm at a 20° tilt. Fits 11 to 16 inch laptops; the cross bars wedge in, no screws.

  • 3 parts
  • ≈ 0.3 kg filament
  • STL
View and download
The empty stand: graphite base with side walls, two orange rollers on white axle pegs and the curved filament guide

Filament Spool Holder

Rolls any spool from 250 g to 3 kg on four 608 skate bearings, with a filament guide. Any hub size.

  • 4 parts
  • ≈ 0.2 kg filament
  • STL
View and download
3D render of the Gridfinity Starter Set: a graphite baseplate filled with white, orange and teal bins

Gridfinity Starter Set

A 4 × 4 baseplate with eight stackable bins that fill it. Gridfinity-compatible, no supports.

  • 7 parts
  • ≈ 0.3 kg filament
  • STL
View and download
3D render of the Dice Tower: a graphite castle tower with a crenellated crown and corner turrets, standing in an orange tray with dice in front of the arched gate

Dice Tower

Two baffles and an exit ramp tumble your dice into a tray with a felt recess. No glue, no supports.

  • 4 parts
  • ≈ 0.3 kg filament
  • STL
View and download
3D render of the Battery Dispenser: a white dispenser with three chutes of batteries, one battery in each tray, and an orange lid

Battery Dispenser

Two AA chutes and one AAA chute. The bottom battery rolls onto a tray, the next drops down.

  • 2 parts
  • ≈ 0.2 kg filament
  • STL
View and download
3D render of the Cube Desk Calendar: two white cubes showing 14 and a teal bar showing OCT in a graphite stand

Cube Desk Calendar

Two number cubes show every date, three bars show the month. With a stand that hides the spare bars.

  • 6 parts
  • ≈ 0.1 kg filament
  • STL
View and download
A lamp shade with a photo in it, glowing

Or design your own

Put your own photo in a phone case, lamp shade or lithophane, right in your browser.

  • Free
  • No account
  • STL
Open the makers